|
26 setembre 2022 |
A computational micromechanics investigation of longitudinal strength in unidirectional fibre reinforced composites |
Barzegar, Mostafa
|
|
31 maig 2023 |
Crack density growth of high temperature cross-ply laminates subjected to elevated temperatures |
Pakkam Gabriel, Vivek Richards
|
|
2008 |
Critical ruptures in a bundle of slowly relaxing fibers |
Kovács, K.
; Nagy, S.
; Cruz Hidalgo, Raúl
; Kun, F.
; Herrmann, H.J.
; Pagonabarraga Mora, Ignacio
|
|
|
|
Critical ruptures in a bundle of slowly relaxing fibers |
Kovács, K.
; Nagy, S.
; Cruz Hidalgo, Raúl
; Kun, F.
; Herrmann, H.J.
; Pagonabarraga Mora, Ignacio
|
|
|
novembre 2023 |
A cross-sectional study comparing osteoporosis in two populations of children with and without JIA: a cross-sectional study with a control group. |
Zalpyte, Camila
|
|
|
31 maig 2023 |
Damage inception of composite under dynamic loadings |
Pernas-Sánchez, Jesús
|
|
|
31 maig 2023 |
Damage sequence of impact events on 3d-printed composite laminates with quasi-static indentation test |
Fernández Chamorro, Alex
|
|
|
|
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
|
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
|
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
1 juny 2018 |
Damage tolerance optimization of composite stringer run-out under tensile load |
|
|
|
5 juny 2018 |
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
15 febrer 2020 |
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
1 desembre 2015 |
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
|
A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test |
Pérez Galmés, Magdalena
; Renart Canalias, Jordi
; Sarrado Molina, Carlos
; RodrÃguez Bellido, Ana Teresa
; Costa i Balanzat, Josep
|
|
|
1 novembre 2016 |
A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test |
Pérez Galmés, Magdalena
; Renart Canalias, Jordi
; Sarrado Molina, Carlos
; RodrÃguez Bellido, Ana Teresa
; Costa i Balanzat, Josep
|
|
|
31 maig 2023 |
Detecting and characterising interfacial fracture through the face sheets of sandwich structures using mirror-assisted imaging techniques |
Leung, Hiu Ling
|
|
|
setembre 2022 |
Determinació de la resistència a fractura pel mode II per materials reforçats unidirecionament utilitzant una prova de cà rrega final calibrada (C-ELS) i una longitud efectiva de fissura aproximada |
Yáñez Alabart, DarÃo
|
|
|
31 maig 2023 |
Determination and modelization of mode I interlaminar fracture thoughness on 2D woven oxide/oxide composite using double cantilever beam test |
Drouin, Thomas
|
|
|
31 maig 2023 |
Determining fracture properties for predicting damage propagation from notches in composite structures |
Wisnom, Michael
|
|
|
31 maig 2023 |
Determining fracture properties for predicting damage propagation from notches in composite structures |
Wisnom, Michael R.
; Sun, Xiaoyang
; Xu, Xiaodong
|
|
|
16 juliol 2020 |
Development of advanced methods to characterise the fracture behaviour of flexible bonded joints |
Manterola Najera, Julen
|
|
|
31 maig 2023 |
Development of tensile specimens with bonded continuous protective layers for the accurate tensile failure strain determination of unidirectional carbon/epoxy composites |
Czél, Gergely
|
|
|
febrer 2017 |
Disseny d’un utillatge per a l’assaig en paral·lel de la tenacitat a la fractura en mode II |
Jiang, Rui
|
|
|
|
Disseny d’un utillatge per a l’assaig en paral·lel de la tenacitat a la fractura en mode II |
Jiang, Rui
|
